色婷婷AV久岛国啪啪一区-av榨乳中文字幕天堂网-国产综合网站-免费看橹橹网站

DC-YL450P-T oil temperature cooler

Model: DC-YL450P-T
Refrigeration capacity: 45KW
Warranty period: 1 year
Application scope: Cooling and cooling of large hydraulic systems, hydraulic machine tools, CNC machining centers, milling machines, beds, four column presses, engraving machines, hydraulic stations and lubrication systems for various machinery

Enquiry

 Performance Characteristic 
 

★  The shell of the oil cooler is designed using 3D sheet metal software and processed using precision laser numerical control sheet metal equipment. The surface is electrostatically sprayed with plastic, resulting in a beautiful and durable appearance. The condenser adopts thickened internally threaded copper tubes and corrugated aluminum foil fins, with high heat transfer efficiency and energy saving!

★  Oil coolers reduce the temperature of oil products, prevent oil quality from deteriorating, oxidizing, and evaporating due to high temperatures, maintain oil viscosity, stabilize oil pressure, prevent oil shock, extend the service life of equipment, solenoid valves, etc., and improve machine tool machining accuracy. An independent silent oil pump circulation system is installed inside the oil cooler. The oil pump sucks in the oil from the tank, cools it down by the oil cooler, and sends it back to the tank to keep the oil temperature constant at the set temperature.

 Application scope 
 Technical Parameter 
 

Model	Model	DC-YL55P	DC-YL83P	DC-YL150P	DC-YL260P-D	DC-YL300P-D	DC-YL450P-T	DC-YL600P-F	DC-YL750-F	DC-YL900-T
Horsepower	HP	2 horses	3 horses	5 horses	8 horses	10 horses	15 horses	20 horses	25 horses	30 horses
Refrigeration capacity	kcal/h	4730	7181	12900	20640	26660	38700	53320	64500	77400
Refrigeration capacity	KW	5.5	8.35	15	24	31	45	62	75	90
Total input power	KW	2.6	4.2	6.5	12.1	14.1	12	16	21	23
Temperature Adjustment Range	℃	Hydraulic oil control temperature:30-40℃
Power supply	Power	380V 50HZ 3PH
Oil pump flow rate	L/min	25	32	50	80	100	150	200	260	300
Oil inlet and outlet diameter	Inch	3/4	1	11/2	11/2	2	2-1/2	2-1/2	2-1/2	3
Refrigerant		R22(Optional refrigerant R407C, R410A)
Condenser		Air cooled condenser (copper tube wrapped with corrugated aluminum foil heat sink)
Evaporator		Stainless steel 316 plate heat exchanger/shell and tube evaporator
Fan		High air volume, low-noise external rotor fan
Appearance Size	Length D mm	605	685	885	1255	1255	1800	1910	2098	2100
	Width W mm	555	685	765	805	805	1050	1100	1248	1250
	Height H mm	1050	1140	1350	1738	1738	1750	1890	2186	2186
Unit protection		Delay protection, flow protection, compressor overheating protection, high and low pressure protection, overcurrent protection, phase sequence/phase loss protection, overload protection, over temperature protection, etc

1. Selection "Description: DC-YL210P-D" DC "is the company code of Duoku," YL "represents the oil cooler," 210 "represents the cooling capacity of 21KW, the number * 0.1 is KW," p "has an internal oil pump," D "has two compressors in a dual system," T "has three compressors, and" F "has four compressors.
2. Refrigeration capacity parameter basis: measured under the conditions of ambient temperature 35 ℃, oil inlet temperature 35 ℃, oil outlet temperature 30 ℃, and 46 # hydraulic oil as the test oil.
3. The oil suction port of the oil cooler must be connected with a hard pipe and equipped with a filter. It is strictly prohibited to install a valve at the oil outlet.
4. The length of the oil suction pipe should not exceed 1.5 meters, and if it exceeds, the oil suction diameter must be thickened.
5. Scope of work: The oil temperature range is 30 ℃ to 40 ℃, and the temperature difference between the inlet and outlet of the oil temperature is 3 ℃ to 8 ℃. The operating environment temperature cannot exceed 40 ℃, and high-temperature models should be selected if the ambient temperature is higher than 40 ℃.
6. Our company reserves the right to change the above parameters or dimensions without prior notice.

 Application 

Application of oil cooler in gantry hydraulic forming equipment

Application of chip liquid oil cooler in large copper CNC lathe

The application of oil coolers in the industries of chip makers and metal balers